One Room Challenge, Week 5
Section 1 & 3 have the framed wall treatment above the chair rail
In Section 2, the walls were too narrow to frame them above the chair rail. I gave them a mock cap on top to finish them off. I also modified the crown in section 2.
I picked up this mirror, that has a gash in the upper right corner.
You just can't get good quality for $15 any more.
Once I fix the red tinted stain
There is one more week....and then the big Tah Dah!
Now let's go make the rounds.

Wall Treatment Specs
This will show you why
On an outside corner, you would need to take 1/2" off one of the boards.
As for the panel widths, I would suggest that you divide the wall into a size that you feel comfortable with. Since every one of my walls were a different length, they are similar to each other, but far from exact.
Furniture placement will camouflage a lot of this.
Here are the specs for the top of section 2
These are the trim pieces that I used
Some of the hard cuts that Joe and Mike did
Wrapped the corners
